EN | CN
Location:: Home- Product center- Selective wave soldering - Selective wave soldering
Selective Soldering SUNFLOW 3
Product features:

1. China's first online electromagnetic pump;
2. The life of Anti-oxidation nozzle is up to six months;
3.Reduce cost, economic and high-precision nozzle;
4. Off-line programming, reduce down time and increase efficiency;
5.Selective heating zone, ECO saving.

Online message   >
  • Product parameters
  • Product details
  • The pioneering on-line selective soldering system in China

    Feature:

    Electromagnetic solder pump
    Pin-and-chain conveyor for PCB transport
    Programmable conveyor width adjustment
    Flux module with precision spray head
    Bottom-side preheating via infrared
    Top-side convection heating
    EasyOn - line / Off - lineprograming
    SuitableforPCBtwosidessoldering
    Separateparametersettingforeverysolderingpoint

    Camera/screen for solder process monitoring

    Selective soldering process:

    Working Process :
    Transport the PCB to flux module
    Spray head move to programed area and flux is applied only  to the soldering joint to be made
    Top –side and bottom-side preheat
    Programed electromagnetic pump soldering perfectly formed solder joint
    PCB is transported out

    Fluxing with high precision:

    Sunflow 3 has programmable precision Flux Head to evenly apply the flux. The application pattern can be point or track in standard machine.The atomizing nozzle can be chosen when the flux area is large and precision requirement is low. The flux is targeted to be applied only to the solder joint to be made and the wettable area can be as small as 2mm.Thus flux consumption is reduced, saving cost.

    Perfect preheating:

    Sunflow 3 combines top heater and bottom heater and it still performs perfectly even for the lead-free soldering or multi-layer boards. Top convection heater has been proved by Sun East Reflow machine for many years and it can offer an even temperature distribution  over the complete board. Bottom IR emitter heater provides optional heating area according the custom board. At the same time, another top heater covers the soldering module and it can maintain the board temperature in all the cycle time.

    Stable High Quality Soldering:

    Feature and advantage
    Electromagnetic solder pump
    Stable wave height
    Quick-change solder nozzles
    Special solder nozzle (can use 2 months)
    Low maintains required

    Chain—roller system:

    Conveyor System combines chain and roller transports. Chain transport system is chosen in flux and preheating module. The soldering module use the roller transport which performs good in location board and repeatability.


    Welcome to our message, we will see at the first time to contact you!
    Name:
    Mail box:
    Telephone:
    Address:
    Left:

    
       


    
       
        
       
       
       
       
  • 
       
       
       
       
       
    1.